Tire Machines & Wheel balancers at wholesale cost

Tires

Shop All Tires

Wheels

Shop All Wheels

Accessories

Shop For All Accessories

Shop For Winter Tires

Tire Machines & Wheel balancers Cheap

ESCO E-Z Way Truck Tire Changer, Model# 10202

$329.99

Demount tubeless truck tires in as few as 8 seconds! U.S.A. Application: Super singles, floats, Max. Width (in.): 16 1/2 - 24 1/2, Material: Cast iron Removes top and bottom bead from one side Operator does not have to lift tire to demount rear or bottom bead Eliminates bead damage Handles all tubeless truck tires from 16 1/2in. to 24 1/2in. Works on most Super Singles/Floats Will not damage aluminum or painted wheels Cast iron 36in.L

FREE SHIPPING Ranger High-Performance Tire Changer Model R23ST

$2,799.99

The fastest and most trouble-free way to service low-profile tires, run flats and high-performance alloy wheels! Boasts 23in. of external clamping capacity, eliminating the need for clumsy adapters or cumbersome tabletop adjustments. Reduces fatigue and allows technicians to work more efficiently. Perfect for high-volume tire shops that service large low-profile tires. HP: 1 1/2, Volts: 110/120 23in. of external clamping capacity No need for adapters or tabletop adjustments Perfect for low-profile tires Handles tires up to 47in. diameter Handles tires up to 18in. wide (for mounting) and 16in. wide (for dismounting) Powerful Jet-Blast bead seating system 4-clamp wheel clamping system Pneumatic blade bead breaking system Tool holder Inflation gauge with integrated air dump valve Inflation pressure regulator/limiter Water filter/oiler/lubricator/air regulator Breaker bar Large soap/lubricator bucket/brush Tilt-back tower design Single/left bead lifting roller Traveling drop-center hold down device Inflation restraint device Tool tray/bin storage Electric/air drive system Requires 110-175 PSI air

FREE SHIPPING Ranger Products Full Service Tire Changer Model# RX950

~~$2,199.99~~ $2,099.99

Ideal for aluminum, special alloys and steel wheels. &Quot;Touchless&Quot; tire changing system has precise rim clamping and pneumatic bead breaking operations to ensure alloy wheels are not damaged. Swing arm tower and adjustable tool head design are combined with a large 11/2 HP, 110/220V motor for superior performance. Dual-position pneumatic blade for bead breaking. Features include electric/air drive system, geometric table design, powerful &Quot;Jet-Blast&Quot; bead seating system and generous 8-gal. surge tank. Rim clamping capacity: 12 1/2in. - 22in. internal, 11 1/2 - 21in. external. Maximums: 12.5in. tire width for table, 3in.-14in. for bead breaking capacity; 50in. tire diameter. U.S.A. Application: Aluminum, special alloys and steel, HP: 1 1/2, Volts: 110/220V, Surge Tank (gal.): 8, Max. Width (in.): 12 1/2 - 22 internal, 11 1/2 - 21 external, Max. Bead Breaking (in.): 3 - 14, Tire Diameter (in.): 12.5

FREE SHIPPING Ranger Products Tire Changer Model# R26EX

$5,099.99

This high-performance tire changer provides the easiest way to change low-profiles, run flats and alloy wheels. Designed to take on wide wheels and stubborn-to-change tires. Features an exclusive Dual Pneumatic Power Assist capable of flexing the stiffest sidewalls and a Power Tape Roller to allow easy bead lubrication and mounting. HP: 1 1/2, Volts: 110/220V, Max. Width (in.): 13 - 28internal, 11 - 26 external, Max. Bead Breaking (in.): 3 - 15, Tire Diameter (in.): 42 26in. external clamping without adapters or table-top adjustments Dual-position pneumatic blade for bead breaking Electric/air drive system Powerful Jet-Blast bead seating system Inflation restraint device Model R26EX

FREE SHIPPING Ranger Rim-Clamp Tire Changer Model# R710

$1,449.99

Great changer for regular shop use or for shops working on regular OEM wheels for standard automobiles and light trucks. Services most wheel and tire configurations. U.S.A. Item is on backorder until September 15th. Application: OEM wheels, auto and light truck, HP: 1 1/2, Volts: 100/220V, Max. Width (in.): 21 internal, 18 external, Tire Diameter (in.): 36 4-clamp system Pneumatic blade bead breaking system Handles tires up to 12in.W (mounting), up to 11in.W (demounting) Requires 110175 PSI air Standard pistol type inflation gauge with integrated air dump valve Inflation pressure regulator/limiter Water filter Oiler/lubricator Air regulator Breaker bar Large soap/lubricator bucket Brush Tool tray/bin storage Adjustable turntable clamps

FREE SHIPPING Ranger Super Duty Truck Tire Changer Model R2600HD

$6,099.99

Heavy-duty tire changer handles BIG truck tires! Features super duty spindle arm construction and powerful 4-jaw chuck. Handles steel and alloy rims up to 26in. and tire/wheels up to 63in. U.S.A. Super duty spindle arm construction Powerful 4-jaw chuck Handles steel and alloy rims from 14in. up to 26in. Accommodates 63in. max. diameter tire/wheel; 31 1/2in. max. tire/wheel width Electric/hydraulic drive system Adjustable hydraulic pressure Remote control pedestal for safe, easy operation Armor-plate disc bead breaking system Operates on 208230V, 60Hz, single-phase Different voltages available on request

Northern Industrial Manual Tire Changer Handles Tires up to 20in.

$99.99

Change your own tires and save BIG money! 11 4/5in. dia. x 1/4in. thick wheel rest plate. Base is 27 1/2in. x 18 1/2in. Tire Diameter (in.): 16 - 20, Base Dimensions (in.): 27 1/2 x 18 1/2 Spindle Diameter: 2 3/8in. Handles rims up to 16in. Handles tires up to 20in. Beadbreaker Handle Included

Northern Industrial Portable Mini Tire Changer, Model# 1302S094

$49.99

Completely portable tire changer pays for itself after a couple of uses! Ideal for your lawn equipment, trailer and other vehicles with smaller tires. Overall 16in.H. Application: Lawn equipment, trailer, Tire Diameter (in.): 4 -12 For all tires with 4in. to 12in. rims Smallest center hole size will accept: 50MM Largest center hole size will accept: 295MM Overall 16in.H

Torin Big Red Automatic Tire Changer Model# TRE8951T-TRE330-TRE335

$4,999.99

Torin Big Red automatic tire changer provides a total solution to your tire changing needs. Handles low-profiles, run flats and alloy wheels Handles wide wheels, tires with stiff sidewalls and all other stubborn-to-change tires Powerful 2-phase 110/220V motor 50/60 Hz S41 steel hexangular shaft Steel mounting head; alloy steel clamp Pedal control with anti-rotate rod Adjustable bead breaker with rotating bead breaker shoe Includes tubeless inflating device with air reserve tank, allowing tubeless inflating from the sides

Torin Big Red Semi-Automatic Tire Changer Model# TRE0810

~~$1,299.99~~ $1,199.99

The Torin Big Red semi-automatic tire changer is suitable for handling 10in.21in. wheels and is also capable of handling 18in. aluminum alloy rims without special attachments. Volts: 220V, Max. Width (in.): 12 -21 internal, 10 -18 external, Max. Bead Breaking (in.): 3 - 12, Tire Diameter (in.): 10 - 21 Self-centering device Pneumatic bead breaker blade and slide with step function Rim clamping capacity: 12in.21in. internal, 10in.18in. external Maximums: wheel dia. 37.7in.; bead-break force 5500 lbs.; wheel width 3in.12in. 110/220V 50/60 Hz power; 0.75W motor

Torin Big Red Semi-Automatic Tire Changer, Model# RE0800

$1,699.99

The Torin Big Red semi-automatic tire changer is suitable for handling 10in.23in. wheels and is also capable of handling 20in. aluminum alloy rims without special attachments. Semi-automatic tire changer is suitable for handling 10in.23in. wheels Capable of handling 20in. aluminum alloy rims without special attachments Self-centering device Pneumatic bead breaker blade and slide with step function Rim clamping capacity: 10in.22in. internal, 8in.20in. external Maximums: wheel dia. 37.7in.; bead-break force 5500 lbs.; wheel width 3in.12in 110/220V power; 0.75W motor

TSI Multi-Tire Changer Secures 4in. to 16 1/2in. Wheels, Model# CH-22

$399.99

The 3 jaws of the Multi-Tire Changer quickly and easily secure 4in. to 6 1/2in. wheels. U.S.A. Clamp-mounted changer includes rim clamp plate and two center posts, one for open or hub type wheels and the other for bearing type wheels Designed for right- or left-handed operators For rims with bearing and hub centers Ball and neck ends lock the tool into working position, making mounting and demounting easier because twisting and turning is minimized (ideal for use on ATV and smaller tires) Optional base available (Item# 146003; sold separately) Handles bearings and hubs from 1/2in. and up FREE Mongoose tire tool Model CH-22

TSI Tire Changer Accessory Pack, Model# CH-22-ACC

$239.99

For use with Multi-Tire Changing Station, Item# 121480. Accessory pack is designed to enhance the stability, capability and profitability of this already solid product. U.S.A. For use with Multi-Tire Changing Station, Item# 121480 Floor plate Mini Mongoose kit (mini Mongoose and shorter post) Tire keeper/mounting clamp 3 short jaws 4 wheel protectors (2 mounting and 2 demounting) to be used with the standard Mongoose tire tool 3 sliding jaw caps

FREE SHIPPING Ranger Wheel Balancer

$1,799.99

The DST 1000 uses Digital-Sensor Technology, a highly accurate system that increases productivity by reducing floor-to-floor times and minimizing come-backs. The Direct-Axis drive system is accurate to within hundredths of an ounce, ensuring balanced, vibration-free wheels. New &Quot;open-side&Quot; hood design allows for a broader coverage of tire shapes and sizes. Drive System: Belt, Balancing Modes: Dynamic, static and alloy Balancing modes: Dynamic, Static and Alloy Electrical requirement: 110V, Single-phase 60 cycle Drive System: Belt Drive Top-Positioning Weight Locator: Standard Inside and Outside Measuring: Standard

Northern Industrial Portable Wheel Balancer, Model# 96026

$89.99

Bulls-eye level makes wheel balancing easy. Head: Aluminum, Accepts Diameter (in.): 1 1/2 to 4 1/2, Dimensions D x H (in.): 11 7/8 x 22 5/8 Machined aluminum head Accepts hubs from 1 1/2in. to 4 1/2in. dia. Rust resistant enamel finish on base 22 5/8in.H x 11 7/8in. dia.

Torin Big Red Truck Wheel Balancer Model# TRE0448

~~$2,599.99~~ $2,499.99

The Torin Big Red truck wheel balancer is an economical solution that is suitable for heavy-duty trucks, buses and other passenger vehicles, including cars and motorcycles. Max. Rim Width: 1.5 to 20 inches, Max. RPM: 215, Motor: 3-phase, 500W 200V/60 Hz Large, easy-to-read display High-capacity, high-stability microprocessor Self-calibration and self-diagnosis functions Can run static, dynamic or 3 ALU programs Easily converts from metric to SAE measurements Includes pneumatic lifter for heavy wheels Handles rims from 10in.24in. dia. Maximum wheel weight: 330 lbs. Maximum rim width: 1.5in.20in. Average balancing speed 215 RPM

Torin Big Red Wheel Balancer with Protective Cover Model# TRE0950B

$1,499.99

The Torin Big Red wheel balancer with cover is a compact, economical wheel balancer that is ideal for cars and light industrial vehicles. Accepts Diameter (in.): Up to 39, Max. Rim Width: 1.5 - 20 inches, Motor: 250W 120/240V/60Hz Features protective cover; operator can control unit by moving cover into position or by pressing start button Large, easy-to-read display Metric measurements Self-calibration function Can run static, dynamic or ALU program Handles rims from 10in.24in. diameter Maximum diameter within cover is 39in. Maximum wheel weight: 154 lbs. Maximum rim width: 1.5in.20in. Average balancing speed 230 RPM

Portable Tire Changer

$99.95

Moose Racing Portable Tire Changer Change tires at a comfortable work height Holds wheel in place during tire change Makes changing tires an easier job Comes with a Reducer Mini Ring Compatible with wheels from 10 up Breaks Down for easy storage Great for trackside or shop use

5040A Rim Clamp Tire Changer with Air Drive Motor: H

$4,843.30

Features and Benefits Clamps wheels externally up to 21" Powerful 1.5 horsepower motor - this air drive system provides plenty of power plus infinite wheel control Bead loosener - three support blocks and sculpted blade provide wheel protection and ensures contact with tire beads at the proper angle Coats X-Shaped Tabletop holds wheels firmly in place during operation Built in Bead Sealing Jets - quickly seals even loose beads while tabletop inflation provides faster workflowAn ideal volume tire changer that handles routine jobs faster and many performance applications. The Coats Model 5040A Tire Changer is designed to work on a wide variety of applications, including virtually all OE fitments. The Model 5040A is the latest platform in the shop proven, Coats Rim Clamp Tire Changer line. The 5040A provides the best value and performance in its class whether you are just entering the tire business or need another changer to add critical capacity. Even if you have never used a Coats Rim Clamp Tire Changer before, you and your crew will feel right at home on this straight-forward, easy to operate machine. All the controls are logically placed for stationary work without excess reaching, walking, or bending. This means you can turn more jobs in a day and turn profits upward. Pedal controlled for more careful tire mounting/dismounting or high volume, lessoning the risk of tire damage. Manual swing arm adjusts horizontal tool head position. Spring assisted vertical height adjustment locks in place with lever. Pressure limiter for inflator control and enhanced safety. Inflation gauge is easy to read and accurately displays tire pressure. The compact chassis fits easily into limited space applications. Required air source 110 to 175 PSI; 14 to 15 SCFM at 150 PSI.Supercedes AMM5030A

5040E Rim Clamp Tire Changer with Electric Drive Motor: H

$4,843.30

Features and Benefits Clamps wheels externally up to 21" Powerful 1.5 horsepower motor - this air drive system provides plenty of power plus infinite wheel control Bead loosener - three support blocks and sculpted blade provide wheel protection and ensures contact with tire beads at the proper angle Coats X-Shaped Tabletop holds wheels firmly in place during operation Built in Bead Sealing Jets - quickly seals even loose beads while tabletop inflation provides faster workflowAn ideal volume tire changer that handles routine jobs faster with many performance applications. The Coats Model 5040E Tire Changer is designed to work on a wide variety of applications, including virtually all OE fitments. The Model 5040E is the latest platform in the shop proven, Coats Rim Clamp Tire Changer line. The 5040E provides the best value and performance in its class whether you are just entering the tire business or need another changer to add critical capacity. Even if you have never used a Coats Rim Clamp Tire Changer before, you and your crew will feel right at home on this straight-forward, easy to operate machine. All the controls are logically placed for stationary work without excess reaching, walking, or bending. This means you can turn more jobs in a day and turn profits upward. Pedal controlled for more careful tire mounting/dismounting or high volume, lessoning the risk of tire damage. Manual swing arm adjusts horizontal tool head position. Spring assisted vertical height adjustment locks in place with lever. Pressure limiter for inflator control and enhanced safety. Inflation gauge is easy to read and accurately displays tire pressure. The compact chassis fits easily into limited space applications. 110 Volt, 30A single phase electric drive system.Supercedes: AMM5030E

Air Rim Clamp Tire Changer with Extended Clamps: H

$11,048.30

Features and Benefits: The model 7050 tire changer was designed especially to handle tough-to-change tires like low profiles and run flats. The robotic arm lets you easily and safely flex stiff sidewalls without superhuman effort. The arm also assists in wheel clamping, second bead removal, and top bead mountingThe 7050 is easy for any operator to learn, and it wont slow you down on standard tires and wheelsIts the tire changer that takes you seamlessly into the next century. Specifications:Rim diameter (extended tabletop only available ) 8 in. -26 in.Externally 6 in. -22 in.Internally rim width 10.5 in.Maximum tire diameter 50 in. Max outside type of drive system air and electric required air source 110 to 175 PSI 2HP Compressor; 5 SCFM min. at 150 PSI chassis footprint 32''W x 40''D x 70''H Shipping weight 450 lbs.

APX90A Rim Clamp Tire Changer with Air Drive: H

$17,848.30

Features and Benefits X shaped high torque electric turntable with external clamping range capacity of 9" - 30", gives you the power you need for tough applications Coats exclusive new three position bead loosener for eliminating wheel damage and increasing productivity Integrated wheel lift lifts heavy assemblies, reducing both wheel damage risk and muscle strain for technicians Ergonomically positioned foot pedals and helper controls located at the point of actuation minimizes training and opportunities for error Can easily handle special applications such as negative offset or reverse mount rims without additional adapters; and when not using the APX90 helper devices it is still a durable and easy to use Rim ClampAs wheel sizes have increased in size, COATS has kept pace by providing technicians with an innovative tire changer to handle virtually any job that rolls in the shop. The APX90 is designed to change the toughest runflats and large custom wheels with ease, while still making quick work of conventional tires and wheels. The air drive system with 2 horsepower compressor, 110 to 175 PSI, 15 SCFM @ 150PSI. The patented Coats RoboArm applies direct pressure to create a bead lock and provide extra leverage on run-flat and low profile tires. The Duckhead Roller keeps the bead in location under the Duckhead when mounting a difficult low-profile tire and can be removed when it is not needed. Powered horizontal rollers allow easy bead and rim lubrication, loosen top leads, plus assist in mounting runflat and low profile tires. Also used to demount the lower lead, with no tire tool needed! The RoboRoller used two tapered wheels to provide additional power when mounting very large diameter runflat and low profile tires.Drop Ship Only

Bench / Rim Clamp Mount Tire Changer: H

$441.66

Features and Benefits: Mounts and demounts a full range of tires on rim diameters from 4" to 12" Mounts easily to a bench or in any standard, four position rim-clamp tire changer A built-in, three fin centering device mounts standard lug-type rims with 2" and larger center hole Square base prevents turning in the changer during use Includes a Ken Tool exclusive: 22" Tire Snake mount-demount tire toolOther features include 16-1/2" height, 21.7 lbs in weight. Threadscrew has been milled to fit MTD wheels.

Bump-N-Roll Tire Changer: H

$112.69

Features and Benefits:Fits 50, 60 and 70 series rim clamp tire changers

Floor Mount Tire Changer: H

$572.64

Features and Benefits: Mounts and demounts a full range of tires on rim diameters from 4" to 15" Tapered bearing guide positively center straight shaft hubs of all diameters A built-in, infinitely adjustable bead breaker works on rims up to 15" in diameter and 24" in width without disassembly Includes a Ken Tool exclusive: 28" Tire Snake mount/demount tire toolAlso features 32" height; 31 lbs. weight. Threadscrew has been milled to fit MTD wheels.

Lube Bottle for Tire Changers - Center Post: H

$9.33

Features and Benefits:Ample size container for tire lubricantFits 4040, 40-40SA and 4050 tire changersUse with lube applicator No. 000491

Silv@rline Tire Changer: H

$3,229.79

Features and Benefits Clamping capacity 10-20" outside, 12-22" inside; rim width capacity to 11" Sturdy four clamp tabletop with dual power clamping cylinders for consistent wheel clamping Sturdy steel mount/demount head with plastic protectors Powerful dual action bead breaker Built-in inflation jets in the clamps for efficient bead seatingAn excellent tire changer for light duty applications made with quality construction at a great value. Semiautomatic swing arm design, maximum tire diameter of 38". Power: 110V, 10 Amp, 120 PSI air. Shipping weight: 540 lbs.

Swing-Arm Tire Changer: H

$3,569.98

Features and Benefits Handles tire diameters up to 42" and wheels up to 22" Self-centering turntable with twin stainless cylinders and adjustable jaws for fast, accurate internal and external wheel mounting Air inflation at the jaw slides with twin ports for easy bead seating and a high capacity air inflation tank Has an oiler and filter regulator Backed by the 5-2-1 warrantyKwik-Way's new swing arm tire changers are designed to get you into the tire changing business with a solid, reliable machine at a competitive price. This tire changer is built with a dual pulley and belt configuration with cast iron drive pulleys for durability. Also a 1.5 HP motor, a self-centering turntable with adjustable jaws and the bead breaker force of 5620 lbs. Standard equipment that's included is adjustable jaws, tool board with inflation gauge, tire iron, mounted lube bucket with brush, solid nylon mount/demount head accessory for alloy wheel applications and the alloy wheel protection kit with tire, bead breaker blade and jaw protector and the plastic inserts for metal mount/demount head. Backed by the best warranty in the industry, the 5-2-1!

TWC581 Extended Swing-Arm Tire Changer: H

$5,779.98

Features and Benefits Extended range - tall tower for tires up to 14" wide; longer arm for longer tires Tire diameters up to 44"; 24" wheel capacity Heavy duty bead breaker is designed to handle larger tires with ease 1.5 HP motor and dual belt and pulley configuration with cast iron drive pulley for durability Backed by Kwik-Way's exclusive 5-2-1 warrantyThis versatile tire changer offers a self centering turntable with twin stainless cylinders for high capacity clamping, fast, accurate internal and external wheel mounting and adjustable jaws. Air inflation at the jaw sides, twin ports for easy bead seating, high capacity air inflation tank. Square turntable improves bead breaker clearance. Includes tool board with inflation gauge, tire iron, mounted lube bucket with brush, an alloy wheel protection kit with iron protector, bead breaker blade protector, jaw protector and plastic insert for metal mount/demount head, and a solid nylon mount/demount head accessory for alloy wheel applications. Specifications: turntable torque: 240 lbs. ft.; turntable RPM: 9; bead breaker force: 5620 lbs.; wheel size (outside clamping): 10"-24"; wheel size (inside clamping): 12"-26"; 1.5 HP motor.Drop Ship Only

570 Wheel Balancer: H

$5,388.57

Features and Benefits Balance up to 40 inch tires with 26 inch wheels Minimum Cycle Time for maximum productivity LCD Monochrome Display for clear read-out Multi-Alu programming for the widest variety of wheel applications Optional Hood sold separatelyManual Data Entry Wheel Balancer with Kwik-Way's Unique Plane Separation System to detect static and coupled imbalance for true 'dynamic' balancing. Low Speed for safe, accurate reading. Minimum cycle time for maximum productivity. LCD backlit monochrome display with adjustable brightness for easy viewing in any lighting conditions. Visually guided balancing procedures for ease of operation. Multi-Alu programming for the widest variety of wheel applications. Kwik-Clamp mounting with 4-cone set. Match mounting programs for precision balancing with minimal weights. Self calibration and self diagnosis programs.Drop Ship Only

571-HS Hand Spin Wheel Balancer: H

$5,075.35

Features and Benefits Balances tires up to 40 inches diameter with 26 inch wheels LCD backlit monochrome display with adjustable brightness for easy viewing in any lighting condition Visually Guided Balancing Procedures for ease of operation Kwik-Clamp Mounting with 4 cone set Unique Plan Separation System to detect static & coupled imbalance for true dynamic balancingMany of the features of the more expensive balancers! Dynamic balancer features the Unique Plane Separation System that detects static and coupled imbalance for True 'Dynamic' balancing. Balances tires up to 40 inches and 26 inch wheels. Manual data entry, multi alu programming for a wide variety of alloy wheel applications. Visual on-screen balancing procedures. Pedal brake to stop rotation and position weights. Optional 12V battery kit available.Drop Ship Only

Computer Wheel Balancer: H

$4,656.30

Features and Benefits Hidden spoke mode allows the technician to hide tape weights behind the spoke Standard Quick Nut and captured back spring Balancing modes - static and dynamic ALU Balancing - versatile Truck round off mode ensures proper balancing of light trucks and SUVsComputer wheel balancer with 10 inch - 26 inch rim diameter capacity featuring 12 molded storage pockets (hood not included). Featured enchanced economy wheel balancer designed to meet the needs of independent shops. Six second balance cycle time. Four side cone storage pegs. Features tire matching.Drop Ship Only

572 2-Dimensional Wheel Balancer: H

$7,275.98

Features and Benefits Balances tires up to 40 inches and 26 inch wheels Minimum Cycle Time for maximum productivity Automatic Tape Weight Placement Program & Applicator helps take the guess work out Visually Guided Balancing Procedures for ease of operation Pedal Brake, controls the processWheel Balancer with automatic distance and diameter arm (2-Dimensional) Automatic Data Entry and Kwik-Way's Unique Plane Separation System to detect static and coupled imbalance for true 'dynamic' balancing. LCD Backlit Monochrome Display with adjustable brightness for easy viewing in any lighting conditions. Multi-Alu Programming, including PAX mode, for the widest variety of wheel applications. Kwik-Clamp Mounting with four-cone set. Low Speed for safe, accurate reading. Self calibration and self diagnosis programs.Drop Ship Only

Economy Computerized Wheel Balancer: H

$5,447.49

Features and Benefits:Ideal balancer for cost and space conscious shops, performing fewer than 20 balancing jobs per day.Its + horsepower direct-drive motor is an industry exclusive.Cycle time is just 10 secondsWheel mounts on motor shaftNo belts or pulleys to maintainData entry control: Keypad

Model 1000 Coats High Volume Wheel Balancer: H

$5,608.30

Features and Benefits 1-1/2 horsepower direct-drive motor and 16-bit microprocessor provide super-fast five second cycle times Eight separate balancing modes (static and dynamic modes, RV and four different alloy modes, plus match mount) Operator "A" and "B" feature so two technicians can use at once Keyboard activated "hood start" saves time Ounce/gram conversion and a roundoff The Model 1000 balancer has mechanical and electronic power to be a key tool in high volume shops. Features convenient keypad entry and self calibration. Includes ergonomic weight and adapter storage. Tire diameter up to 40"; rim width: 2" to 19.9"; maximum tire weight: 150 lbs.; shaft diameter: 28mm; shaft length: 6-5/8"; resolution: .01 oz.; resolution: 1.4 degrees; accuracy: .01 oz.; power requirement: 220V AC 1-3 phase; 57"W x 50"D foot print. Shipping weight: 586 lbs.

Model 775 Discover Coats Light Duty Wheel Balancer: H

$3,823.30

Features and Benefits Integrated LED Matrix Display: easy-to-read visual cues and keypad promote proper balancing techniques and faster bay turnaround times 10 Balancing Modes: multiple static, dynamic, and alloy modes Self-Calibrating: provides balancing accuracy within 1/100 of an ounce Space Saving Design: put your balancing station virtually anywhere 40 mm Shaft: uses all standard Coats accessoriesThis little dynamo gets you started in a big way. Offering wheel balancing to your customers is a great way to add new revenue to your business. You stay more competitive and keep balancing service in your shopwhere it belongs. The Coat 775 is a great place to start. This unit is designed for low volume occasional balancing of OE fitments but offers features you will find on much more elaborate machines. Other features include: self calibrating, Tape-A-Weight capability, Hidden weight capability, maximum tire weight: 100 lbs., Maximum tire diameter: 34" to 40", rim width: 2" to 20", rim diameter: up to 30", balancing speed: 10 RPM, motor: 110V, 1 Ph. Shipping weight: 198 lbs.

Model 1175 Coats Medium Duty Wheel Balancer: H

$6,798.30

Features and Benefits Color LED Matrix Information Box: get balancing information at a glance from the information box 10 balancing modes: multiple static, dynamic, and alloy modes Automatic Distance and Diameter Data Entry: automatic offset and diameter measurements make each balance quick and precise Direct Tape-A-Weight Placement: audible beeps indicate exact placement of Tape-A-Weights and take the guesswork out of those tricky behind-the-spoke balances Auto start hood: balancing cycle begins when you lower the hoodThe perfect medium-duty back-up machine, or your one and only. Whether you want to begin offering wheel balancing to stay more competitive or just need a back-up machine for the full-featured balancer you already have, our Coats 1175 is a great choice. Designed for operator ease and speed, it offers years of rugged durability and dependability, and performs like a high-end balancer all for a value price. Other features include: self calibration accuracy within 1/100 of an ounce; expanded storage: 16 pocket weight tray provides easily reachable, abundant storage; 40mm shaft uses all standard Coats accessories; Tape-A-Weight and Hidden Weight Capability keeps weights out of sight; space saving design; maximum tire diameter: 34"; rim width: 2" to 20"; rim diameter: up to 30"; maximum tire weight: 150 lbs.; balancing speed: 100 RPM; motor: 220V, 1 phase. Shipping weight: 264 lbs.

Silv@rline Wheel Balancer: H

$3,229.79

Features and Benefits 5 Alu/Alu P modes, static and dynamic modes available Easy to read digital display, with LED mode indicators Unbalance displays in grams or ounces Automatic wheel spin and end cycle brake Optimization program for premium balance A full function computerized digital wheel balancer for light duty applications. Quality construction at a great value. Includes the following: sturdy large weight tray with side pegs for storage; speed-nut wheel clamp for fast operation; standard 3 cone kit with weight hammer and calipers. Maximum tire diameter: 33"; maximum rim diameter: 30"; maximum rim width: 17.5"; maximum assembly weight: 143 lbs.; 3 cone range: 1-3/4" to 6-1/8"; power: 110V; shaft diameter: 36mm. Shipping weight: 370 lbs.

XR1800 Wheel Balancer: H

$14,278.30

Features and Benefits: Solve the toughest vibration problems A complete suite of diagnostic software identifies and helps the technician solve even the toughest vibration problems, including multiple conditions related to imbalance. Diagnostics are fast enough to use on every balance for the ultimate customer satisfaction. Simple, interactive user interface Real-time 3D animated graphics and visual cues promote proper balancing techniques and faster floor-to-floor times. Technicians have a wealth if information at their fingertips. Automatic data entry The XR 1800 features a touch less digital data collection system that takes the measurements for the technician. Theres also direct Tape-A-Weight location and behind the spoke weight placement (the best in class) for balancing todays more complex wheel designs. In fact, the XR 1800 can do most Tape-A-Weight balances in just one spin. The easiest premium balancer to operatea Every step of technician activity has been carefully planned for speed and accuracy. The XR 1800 has a slide nut for faster mounting, automatic starting when the hood is dropped, video and sound indications of when the weight is properly positioned, and even a complete onboard training mode. Full color video display: 3-D and 2-D modes. Provides clear directions and operator prompts for easy balancing. Simultaneous display of static and dynamic dataPositioning pedal: Clamps wheel into stable position for easy weight placementEasy command selection: Simple numbered button system speeds technician input and mode selectionOnboard air supply: No need to move to tire changer for rotate and balance jobs. Adjust tire inflation at the balancer3-D auto data entry: Touchless digital sensor system eliminates outer arm and collects parameters for analyzing balance. Drop the hood and the balancer begins its cycleAdapter carousel: Puts most commonly used accessories right at the technicians fingertips.High volume weight tray: Holds ample supplies of weights. Sliding top tray increases capacity and stores tools.Balancing solutions: CD-ROM with XR 1800 video overview, plus information on all Coats balancers and key accessoriesR.I.D.E : Complete collection of free printable merchandising materials (posters, counter cards consumer literature) that can be used to promote premium balances and increase service revenues.


	Wherever you are, our Recommended Installers are nearby and ready to install your order! Find out about Recommended Installers in your area.